-
Inorganic salts
- Lithium Chloride
- Lithium Chloride Solution
- Lithium Bromide Solution
- Lithium Acetate
- Lithium Acetate Dihydrate
- Lithium Sulphate
- Lithium Sulphate Monohydrate
- Lithium Perchlorate
- Lithium Iodide Trihydrate
- Lithium Iodide Anhydrous
- Lithium Molybdate
- Lithium Chromate
- Lithium Phosphate
- Lithium Fluoride
- Lithium Nitrate
- Lithium Carbonate
- Lithium Carbonate （battery grade）
- Lithium Hydroxide Mono.
- Lithium Hydroxide Anhydrous
- Lithium Gluconate
- Lithium Orotate
- Potassium Iodide
- Lithium Metal
- Sodium Iodide
- Cesium Carbonate
- Cesium Chloride
- Rubidium Carbonate
- Rubidium Chloride
-
Polyurethane resin
- Aliphatic PU resin for composite
- Anti-moisture elastic structure adhesive
- Anti-moisture PU structure adhesive
- Anti-moisture rigid structure adhesive
- Flexible PU gel for sealant
- Performance matrix resin for Prepreg
- PU adhesive for rock plate
- PU resin for performance composite
- Shore A00~A000 level PU gel
- Specialty PU Elastomer
- Specialty PU resin as plugging agent
- Specialty PU resin for pour-in-situ seal ring
- Aliphatic PU resin for composite
- Anti-moisture elastic structure adhesive
- Anti-moisture PU structure adhesive
- Anti-moisture rigid structure adhesive
- Flexible PU gel for sealant
- Performance matrix resin for Prepreg
- PU adhesive for rock plate
- PU resin for performance composite
- Shore A00~A000 level PU gel
- Specialty PU Elastomer
- Specialty PU resin as plugging agent
- Specialty PU resin for pour-in-situ seal ring
Anti-moisture rigid structure adhesive
Component:
WINNATE-302A
WINCURE-302B
Application:
·Used as pour-in-situ seal ring for proof of vacuum-loss, or fluid-loss for precise instrument.
Advantage:
·Easy to process and no need for method to prevent from moisture voids as that of common PU solution
·Non-additive added
·Good adhesion to various substrates
·Good flowability to fill in small gap
·Curable under room temperature
·High strength and tough
Picture:
Process parameter:
|
Items |
WINNATE-302A |
WINCURE-302B |
|
Appearance |
- |
- |
|
Viscosity@25℃ |
- |
- |
|
Material temperature |
- |
|
|
Mold temperature |
- |
|
|
Room temperature |
- |
|
|
Impregnting temperature |
- |
|
|
Weight ratio for mixing |
- |
|
|
Non-bubble mixer |
- |
|
|
Pot life |
- |
|
|
Gelling time |
- |
|
|
Curing |
- |
|
|
Non-tacky time |
- |
|
Typical property:
|
Items |
WINNATE-302A |
WINCURE-302B |
|
Hardness |
- |
|
|
Tensile/Elongation |
>10 MPa / >500% |
|
|
Tear |
>90 N/mm |
|
|
Adhesive strength |
- |
|
|
Compression strength |
- |
|
|
Bending strength |
- |
|
|
Adhesion strength (via pull & shear) |
||
|
Al/Al |
Glue broken 6.3 MPa |
|
|
PET/PET |
PET fatigue |
|
|
PC/PC |
PC broken |
|
|
PMMA/PMMA |
PMMA broken |
|
|
PVC/PVC |
PVC broken |
|
|
Nylon/Nylon |
3 MPa |
|
|
PP/PP |
3.5 MPa |
|
