-
Inorganic salts
- Lithium Chloride
- Lithium Chloride Solution
- Lithium Bromide Solution
- Lithium Acetate
- Lithium Acetate Dihydrate
- Lithium Sulphate
- Lithium Sulphate Monohydrate
- Lithium Perchlorate
- Lithium Iodide Trihydrate
- Lithium Iodide Anhydrous
- Lithium Molybdate
- Lithium Chromate
- Lithium Phosphate
- Lithium Fluoride
- Lithium Nitrate
- Lithium Carbonate
- Lithium Carbonate （battery grade）
- Lithium Hydroxide Mono.
- Lithium Hydroxide Anhydrous
- Lithium Gluconate
- Lithium Orotate
- Potassium Iodide
- Lithium Metal
- Sodium Iodide
- Cesium Carbonate
- Cesium Chloride
- Rubidium Carbonate
- Rubidium Chloride
-
Polyurethane resin
- Aliphatic PU resin for composite
- Anti-moisture elastic structure adhesive
- Anti-moisture PU structure adhesive
- Anti-moisture rigid structure adhesive
- Flexible PU gel for sealant
- Performance matrix resin for Prepreg
- PU adhesive for rock plate
- PU resin for performance composite
- Shore A00~A000 level PU gel
- Specialty PU Elastomer
- Specialty PU resin as plugging agent
- Specialty PU resin for pour-in-situ seal ring
- Aliphatic PU resin for composite
- Anti-moisture elastic structure adhesive
- Anti-moisture PU structure adhesive
- Anti-moisture rigid structure adhesive
- Flexible PU gel for sealant
- Performance matrix resin for Prepreg
- PU adhesive for rock plate
- PU resin for performance composite
- Shore A00~A000 level PU gel
- Specialty PU Elastomer
- Specialty PU resin as plugging agent
- Specialty PU resin for pour-in-situ seal ring
Component:
COHSIN-3121A
WINNATE-5022B
WINCURE-5050
Application:
·Used as plugging agent for oil-drilling industry.
Advantage:
·Adjustable product portfolio upon underground temperature
·Flexible pot-life (2~6 hrs) for wide process window
·Low viscosity for pumping and pipe delivery
·Faster solidation after gelling than that of Epoxy solution
·Moderate thermal release than that of Acrylate solution
·No-foaming issue like common PU system with underground water
·Suitable for underground temperature (≤120℃)
Picture:
Process parameter:
|
Items |
COHSIN-3121A |
WINNATE-5022B |
WINCURE-5050 |
|
Appearance |
- |
- |
- |
|
Viscosity@25℃ |
- |
- |
- |
|
Material temperature |
- |
||
|
Mold temperature |
- |
||
|
Room temperature |
- |
||
|
Impregnting temperature |
- |
||
|
Weight ratio for mixing |
- |
||
|
Non-bubble mixer |
- |
||
|
Pot life |
hours pot life under 120℃, containing much water inside |
||
|
Gelling time |
- |
||
|
Curing |
- |
||
|
Non-tacky time |
- |
||
Typical property:
|
Items |
COHSIN-3121A |
WINNATE-5022B |
WINCURE-5050 |
|
Hardness |
- |
||
|
Tensile/Elongation |
- |
||
|
Tear |
- |
||
|
Adhesive strength |
- |
||
|
Compression strength |
>100 MPa |
||
|
Bending strength |
- |
||
|
Adhesion strength (via pull & shear) |
|||
|
Al/Al |
- |
||
|
PET/PET |
- |
||
|
PC/PC |
- |
||
|
PMMA/PMMA |
- |
||
|
PVC/PVC |
- |
||
|
Nylon/Nylon |
- |
||
|
PP/PP |
- |
||
