-
Inorganic salts
- Lithium Chloride
- Lithium Chloride Solution
- Lithium Bromide Solution
- Lithium Acetate
- Lithium Acetate Dihydrate
- Lithium Sulphate
- Lithium Sulphate Monohydrate
- Lithium Perchlorate
- Lithium Iodide Trihydrate
- Lithium Iodide Anhydrous
- Lithium Molybdate
- Lithium Chromate
- Lithium Phosphate
- Lithium Fluoride
- Lithium Nitrate
- Lithium Carbonate
- Lithium Carbonate （battery grade）
- Lithium Hydroxide Mono.
- Lithium Hydroxide Anhydrous
- Lithium Gluconate
- Lithium Orotate
- Potassium Iodide
- Lithium Metal
- Sodium Iodide
- Cesium Carbonate
- Cesium Chloride
- Rubidium Carbonate
- Rubidium Chloride
-
Polyurethane resin
- Aliphatic PU resin for composite
- Anti-moisture elastic structure adhesive
- Anti-moisture PU structure adhesive
- Anti-moisture rigid structure adhesive
- Flexible PU gel for sealant
- Performance matrix resin for Prepreg
- PU adhesive for rock plate
- PU resin for performance composite
- Shore A00~A000 level PU gel
- Specialty PU Elastomer
- Specialty PU resin as plugging agent
- Specialty PU resin for pour-in-situ seal ring
- Aliphatic PU resin for composite
- Anti-moisture elastic structure adhesive
- Anti-moisture PU structure adhesive
- Anti-moisture rigid structure adhesive
- Flexible PU gel for sealant
- Performance matrix resin for Prepreg
- PU adhesive for rock plate
- PU resin for performance composite
- Shore A00~A000 level PU gel
- Specialty PU Elastomer
- Specialty PU resin as plugging agent
- Specialty PU resin for pour-in-situ seal ring
Component:
WINNATE-002A
COHOL-002B
Application:
·Low stress potting adhesive for end beam.
·PU gel sealant for liquid tank filter.
Advantage:
·Supersoft, nearly non-stress feel
·Non-plasticizer added
·Visco-elastic and extra-slow stress-response
·Self-healing, self-adhesive
Picture:
Process parameter:
|
Items |
WINNATE-002A |
COHOL-002B |
|
Appearance |
Transparent liquid |
Transparent liquid |
|
Viscosity@25℃ |
4300 mPa·s |
1100 mPa·s |
|
Material temperature |
35~45℃ |
|
|
Mold temperature |
35~45℃ |
|
|
Room temperature |
- |
|
|
Impregnting temperature |
- |
|
|
Weight ratio for mixing |
A:B=15~35:100 |
|
|
Non-bubble mixer |
45 sec |
|
|
Pot life |
>20 mins |
|
|
Gelling time |
<120 mins |
|
|
Curing |
- |
|
|
Non-tacky time |
- |
|
Typical property:
|
Items |
WINNATE-002A |
COHOL-002B |
|
Hardness |
Shore A000/15~Shore A00 @25℃ |
|
|
Tensile/Elongation |
—— / >>100% |
|
|
Tear |
- |
|
|
Adhesive strength |
- |
|
|
Compression strength |
- |
|
|
Bending strength |
- |
|
|
Adhesion strength (via pull & shear) |
||
|
Al/Al |
- |
|
|
PET/PET |
- |
|
|
PC/PC |
- |
|
|
PMMA/PMMA |
- |
|
|
PVC/PVC |
- |
|
|
Nylon/Nylon |
- |
|
|
PP/PP |
- |
|
